New
   

In Stock

Specifically designed to clean hard cases of bauxite cargo deposits or bauxite stains from CARGO HOLD.

Compare
SKU: RXSOL-22-2088-025 Category:
   

Description

Bauxite Remover manufacturer, supplier and exporter. Bauxite remover is advanced blend of various acid with additional base and inhibitor. Its powerful chemical Bauxite removal action dissolves buxite hard deposits without any mechanical action. This is the reason why Bauxite Remover is so popular for removal of BAUXITE.

Application:

Very effective products to removes Bauxite deposits and stains also improves metal appearance.

Direction for use

For Bauxite removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-22-2088-025 , can be applied by brush ranging from 10-50% and left to react for 5 – 40 minutes then  the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.

• For aluminium , only diluted solution up to 10 – 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 – 10 parts water, and immerse
from 1 – 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with elevate4d temperatures
up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.

 

Dose:

On completion of CLEANING OPERATION if  bauxite stains remains on surface, then repeatuse 10 to 50% of RXSOL-22-2088-025 with  fresh water for 20 -30 minutes .  For detailed instruction pl. click on this link http://tiwariindia.com/wiki/index.php/Main_Page     .

Appearance                                 : Clear & Colourless fLiquid
Specific gravity (200C)                :  1.1
Flash point  cc                              :  None

 

Note:

RXSOL is pioneer to manufacture Rust Remover. RXSOL brand rust remover is highly concentrated and full strength of material to remove rust from metal surface. Our compnay name is popular as a rust remover supplier in Mumbai, Chennai, Kolkata, Gandhidham, Mundra, Kandla, Sikka, Surat, Goa, Manglore, Vizag – Visakhapatnam, Chennai, Ennore, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi, Middle East, Gulf, Turkey, Istanbul, USA.

Pl. refer this link for our various location details…

you may click below to get all location details :::

For Tamilnadu – http://ennoreindiachemicals.com/contact-us

For Andhra Pradesh – http://vizagchemical.com/contact-us

For East Coastal – http://eastindiachemicals.com/contact-us

For Gujrat Port – http://westindiachemical.com/contact-us

For Mumbai Port –  http://marinechemical.in/contact-us

For JNPT – GOA – Manglore port – http://rxchemicals.com/contact-us

For Middle East – Gulf – http://www.dubichem.com/contact

 

Additional information

MSDS

Product Name

RXSOL-22-2088-025

Product Type

Bauxite REMOVER

Revised Date

18-01-2020

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah

Phone

+91 22 27815540 / 41 / 42

Fax

+91 22 2781 1318 :::AOH :0091 9821214367

Email

mail@rxmarine.com

Ethoxylated Fatty alcohol, Phosphoric Acid and Long chain Detergent  remaining which is not in the list of hazardous materials .

Human Health  Hazards    R 34 : Causes Burns
Keep away from food, children , animal .

Inhalation

No fumes but after inhalation medical attention require

Skin Contact

In case of contact with skin , wash immediately with plenty of water and soap   Remove contaminated clothes.

Eye Contact

Flush with running water for at least 15 minutes Immediately medical attention require.

Ingestion

Seek medical attention , try to drink more plenty of fresh water.

Non combustible product

Suitable 

Not known , on direct exposure to heat dangrous emission of gas of COx SOX  can be released

Not suitable

Not applicable 

Special  

Not applicable

Protection of fire Fighter

Not applicable  

Precaution for fire fighters   

Wear protective equipment with breathing apparatus.

Enviromental Precaution

Before flowing into drainage system, surface or ground water First of all neutralize with alkaline materials like lime powder for pH balancing between 6-10.

Cleaning Method

Flush Spill Area with Water and avoid contact with skin and eye.

Condition to Avoid    

Non flammable but avoid direct heating

Materials  to Avoid  

Do not subject to ALKALINE medium.

Handling

Keep Container Tightly Closed

NOTE :
Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website http://www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to  water never add water to RXSOL.)

Personal protection:

Eye Protection   

Strictly wear eye protection

Hand protection

Wear PVC chemical resistance protective gloves

Appearance

Clear liquid

Density   

g/cm3 at 15°C: 1.5

pH  

10% solution 1.5-2.5

Flash Point

Not applicable

Compatibility  

 

Metal   

Concentrate and long touch may corrode.

Rubber 

No known effect

Decomposition Products: Do not occur hazard if stored and used as directed.  In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced. 
NOTE : AVOID CONTACT WITH ALKALINE SUBJECT.

Skin Irritation

Cause severe irritation

Eye Irritat

Cause severe irritation

Sensitization    

Cause Sensitizing

Chronic Toxicity  

Not Identified

Carcinogencity   

No

 RXSOL-16-1088-025 is degradable and due to highly acidic in nature must be neutralized as per guidance and ingridents used in it. 

As per guide line, Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treat- ment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required.

Transport over land ADR/RID

1805 8/11c 8/11c

Transport over inland waterways ADN/ADNR

 

Transport over sea IMDG

8

Transport by air ICAO/IATA

8/1805

Phosphoric acid

 

sea

EMS 8-08, MFAG 700 PG III

Classification and labelling according to 4. Novelle Gefahrstoff-Verordnung Symbols of danger :C Corrosive Ingredients : Phosphoric acid R-phrases :

R34

Use Hand gloves , Cause burns

S-phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S26

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S45

In case of accident or if you feel unwell, seek medical advice immediately

National prescriptions : Self classification on the basis of component assessments or analogy conclusions without addition/subtraction of points
for good/poor biodegradability etc.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe
our products from the point of view of safety requirements and is not intended to guarantee any particular properties.
 

Technical Bulletin

This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.

 * Cleans and brightens aluminium and copper.
 * Removes rust stains without risk to paintwork.
 * Safe on most common metals for Rust Removel & Passivation 

Direction for use
For rust removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-16-1088-025 , can be applied by brush ranging from 10-50% and left to react for 5 – 40 minutes then  the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.

• For aluminium , only diluted solution up to 10 – 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 – 10 parts water, and
  immerse from 1 – 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with eleva-
  te4d temperatures up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.

For best performance on aluminium use RXSOL Degreaser for degreasing as it has a neutral pH.
Paintwork : RXSOL-16-1011-RR-20  should be diluted with water  1:4 . Then solution can be applied
by brushing, spraying for  10 – 20 minutes the residues should be rinsed off thoroughly with high pressure  water.

PHYSICAL Properties

Appearance

Clear & Colourless fLiquid

Specific gravity (200C)

1.21

Flash point  cc

None

R 34

Causes burns.

S 26

On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.

Have a Question? Submit it here!

*
*

*

Online Inquiry
Loading...
Show Buttons
Hide Buttons