Skip to main content
Email suratchemical @ gmail.com:
Contact: 91 08069976684

Corrosion Scale Inhibitor Phosphate Based

Corrosion Scale Inhibitor Phosphate Based
SKU
RXSOL-43-4029-200
Supply Location::
Locations

RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System  Liquid manufacturer and supplier in Mumbai, Turbhe Pawana MIDC, Gandhidham, Visakhapatnam, Chennai Ennore, Kolkata, Haldia, Ajman, Fujairah, Dubai, Sharjah, Dubai, Muscat, Oman, Sohar, Barka, Canada, SUDAN, Yemen


SURAT CHEMICAL TAG::

RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System. Phosphates and zinc stabilizer for anti-scale / anti-corrosion water treatment formulations. Also demonstrates excellent efficiency in the presence of soluble iron where acrylic polymers fail. Excellent dispersant for iron oxides.

Corrosion Scale Inhibitor Phosphate Based is a multi-metal corrosion inhibitor designed for use in open loop cooling water systems. It provides effective protection for mild steel, copper, and yellow metals, while minimizing scale and deposit formation. The formulation combines proprietory polymers specially manufactured for superior film-forming and corrosion control under various water qualities.

Remarks
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System  product does not require additional acid treatment. 
ADVANTAGES of RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System
Clean Surfaces  - Maximum heat transfer  -
Its regular doses increases Higher efficiency
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System  - Reduced Maintenance down time  - Increased production
Non Toxic  - Easy and Safe in use 
Tag Identification
RXSOL ROCCORrx OC is scientifically formulated to keep clean open recirculating systems and also prevent scale formation. Chemically ROCCORRX OC will disperse scale and corrosive products, silt etc, and can be used as an anti-foulant along with other treatments.
 
Easy to feed RXSOL ROCCORrx OC  directly from the drum or from a stock dilution tank.  The slug feed method can also be used. 
RXSOL ROCCORrx OC  is a highly concentrated cooling water treatment product, Its small dosage is from 500 ml – 1 Ltr per 10 Tons of Cooling Water.
Note

RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System  compatible with nylon, neoprene or rubber jointings.  


RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System  is a combined dispersant and anti-foulant and corrosion inhibitor which is specially formulated for the prevention of scale, deposits and corrosion in open fresh water, cooling systems. 
 
It is formulated from Polyphosphates, organophosphates and Polyacrylates.
 
Feature Benefit
Multi-metal protection Effective for steel, copper, and brass
Polyphosphate base Film-forming corrosion inhibition + sequestering
Zinc synergy Boosts performance, even in aggressive waters
Triazole addition Superior copper/brass protection
Dispersant included Minimizes fouling from calcium or debris
Easy to dose Liquid product, fully water-soluble
Environmentally safer Alternative to chromate-based inhibitors
 
Property Value
Appearance Clear to slightly hazy amber liquid
Odor Mild characteristic
pH (as supplied) Alkaline
Specific Gravity @ 25°C 1.10 – 1.20
Solubility Fully water soluble
Freeze Point Below 0°C
Shelf Life 12 months (sealed container)

Corrosion Inhibitor OPEN Cooling System  scientifically formulated to keep clean open recirculating systems  and also prevent from scale formation . Chemically Corrosion Inhibitor OPEN Cooling System  will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments. 

Excellent scale inhibition for a variety of applications including cooling circuits, boilers and RO units.

It is widely used in Boilers, cooling water and membranes

RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System  is highly concentrated cooling water treatment product, Its small dosage from 0.5 – 1 liter per 10 Tons of Cooling Water. The source of water also directly affecting its dosage as  The dosage depends on the quality of the supply water ( Total hardness and Chloride content as low as possible) .  Control is by simple colourismetric test. 

Optimum result of COOLING SYSTEM can be obtained by maintaing pH level 8 to 8.5 and Total phosphate level should be maintained between 20 and 30 ppm. 

Feel free to ask for RXSOL PHOSPHATE TEST KIT, RXSOL HARDNESS TEST KIT, RXSOL CHLORIDE TEST KIT. We are keeping full range of TEST KIT.

 

System Type Typical Dosage
Open Loop Cooling Towers 50 – 150 ppm in recirculating water
High-corrosion conditions Up to 200 ppm based on metallurgy and water quality
pH Control Range Operates best between pH 7.0 – 8.5
  • Dosing Method: Continuous injection via dosing pump into cooling water basin or line.
  • Monitoring: Maintain residual phosphate at 2–5 ppm and zinc at 0.5–1.5 ppm in system water

  • Compatible with: Sodium hypochlorite, non-oxidizing biocides, anti-scalants.

Corrosion and Scale Inhibitor (Bi-functional) Cooling water System, Phosphate based product.

Content::
content

#CorrosionScaleInhibitorPhosphateBased_supplier_in_Navlakhi
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Okha
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Anjar
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Ankleshwar
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Bharuch
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Hazira
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Surat
#CorrosionScaleInhibitorPhosphateBased_supplier_in_Gujarat

Copyright © 2021 Powered By SURAT CHEMICAL - All Rights Reserved