In Stock

Specifically formulated for the effective removal of heavy duty residues and can be also applied by high pressure spraying equipment

Compare
SKU: RXSOL-22-2220-025 Category:
   

Description

Holdbrite supplier at all INDIAN – UAE port. One of popular and effective product for SHIP HOLD cleaning.
Holdbrite RX is highly concentrated, comprising special detergents, surfactants, builders and corrosion inhibitors. It is specifically formulated for the effective removal of heavy duty residues and can be also applied by high pressure spraying equipment. Holdbrite Rx can be quickly dissolved in water for removing lighter grease, oil, pet coke and dirt deposits. Compatible with most coated surfaces and dries leaving a good shine. Holdbrite RX  is water based, non flammable, biodegradable Product.

Application:

Holdbrite PLUS  can be used for cargo hold and tanks cleaning and refrigeration vessels, as well as soot removal from Inert Gas Systems and general cleaning. It effectively removes greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. Diluted, it removes lighter grease, oil, petcoke and dirt deposits.It is also suitable for applied on vertical surfaces and due to foaming properties, its increases the residential time, thus cleaning efficiency.

Dose:

Information  are based on experience and are meant only as a guide since circumstances for each tank cleaning operation vary. They are not intended to interfere with the judgment of the vessel’s responsible personnel.Precleaning tanks with high pressure warm water is highly recommended since large deposits of oil or other residues in the tank must be removed to ensure an effective cleaning operation.
General Cleaning
For general use, dilute Holdbrite RXSOL  appropriately, depending on the contamination, and use conventional cleaning methods, such as brushing, scrubbing or hand spraying.
Removal of Soot from Inert Gas Systems (IGS)
Dilute from 5 to 20% of Holdbrite RXSOL in fresh water. Spray the solution onto the surface, using high pressure cleaning equipment. When used with a hand sprayer, apply 1 litre of neat Holdbtire Rx  per 12 m2. Allow the product to act and then rinse off with fresh water before drying. Allow solution to penetrate soil for about 30 minutes and then wash off thoroughly with high pressure fresh water, heated up to 80°C. Always wash off before chemicals dry on the surface. Repeat the procedure, if contamination persists.
Cargo Tank and cargo hold cleaning
Holdbrite Rx  is ideal for tank cleaning for most types of contamination. Suitable for epoxy, but not for zinc silicate coatings.The dosage rate for direct injection with tank washing machines is 1-20 litres per ton wash water (0.1-2.0%). For recirculation, use a rate of 1-20 litres per ton wash water (0.1-2.0%). For heavily soiled areas, a preliminary cleaning is required. If surface is heavily contaminated, higher concentrations of the product in water can be used. When used for spot cleaning, apply by hand spraying neat or prepare a 20% solution, and allow solution to penetrate soil for about 30 minutes before rinsing off with water. Always wash off before chemicals dry on the surface.
If Slip Coat Rxsol Hold Block or Rxsol Barrier Hold Coat is applied to the cargo hold surfaces prior to loading, the concentration of Holdbrite RXSOL  in the cleaning solution may be reduced.

Note:

Feature & Benefit
Effective cleaning of heavy duty residues from cargo hold tanks, decks, bulkheads, etc.
Heavy duty, water-based cleaner.
Efficient, multipurpose cleaning.
Highly concentrated: dilute for most cleaning needs.
Comprises special detergents, surfactants, builders and corrosion inhibitors.
Removes soot from Inert Gas Systems (IGS).
 Non-flammable.
Suitable to use with hot or cold water high pressure equipment.

Additional information

MSDS

Product Name

:

Holdbrite RXSOL

Part Number

:

RXSOL-22-2220-025

Specialized product for cargo hold cleaning.
Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone

:

+91 22 65113333 / 5555 / 9999 / 27611360

Fax

:

+91 22 2781 1318 :::AOH :0091 9821214367

Email

:

mail@rxmarine.com

 

Chemical Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols

Potassium   hydroxide         

10-5%

1310-58-3 

215-181-3 

35

2-butoxy ethanol

1-5%

111-76-2

203-905-0

X

 

Fatty alcohol ethoxylate

5-10%

34398-01-1

500-084-3

41

 

Disodium Metasilicate

 1- 5%

6834-92-0

229-912-9

 

C

Non classified ingredients

60-70 

 

 

 

 

Odour

Odourless

Appearance

Liquid, colourless , soluble in water

Contact with eyes

Corrosive to eyes, Can cause damage to the eyes

Contact with skin

Causes severe burns (R35)

Inhalation

No information available but must be considered harmful

Ingestion

Harmful if swallowed (R22)

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash    with soap and water.Seek medical advice if necessary

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives.

Ingestion

Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention.

Inhalation

Seek medical attention if ill effects occur

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)  (S45) When in doubt or symptoms persist, seek medical attention

Non combustible. Smoke from fires is corrosive. Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions.
Vapour density – not applicable.

Personal Precautions

Wear protective clothing as per section 8

Environmental Precautions

Do not allow to enter public sewers and watercourses

Clean Up Actions

Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid

Special Precautions

Wear protective clothing as per section 8

Handling

Eyewash bottles should be available.See Section 8.

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

Exposure Limits

OES / LTEL # ppm 2 mg/m3 (Sodium hydroxide).

Exposure controls

No special ventilation is required unless the product is used in a spray form.

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are  recommended) During fumigation/spraying wear suitable respiratory equipment (S42).

                                            

Gloves                     Suit.                    Goggles              No_Smoking

Odour

Odourless

Appearance

Liquid, colourless to yellow, soluble in water

pH

11.5 – 12.5 at 0.1 % concentration, pH 13 – 14 at 100 % concentration

Boiling point

>100 °C at 760 mm /Hg

Vapour pressure

not known

Vapour density

not applicable

Freezing point

5 °C at 760 mm/Hg

Completely soluble in water

Specific gravity (water=1)

1.045 – 1.055

Non combustible

–  This article is considered stable under normal conditions
–  Avoid overheating, Keep away from frost
–  Incompatible with acid
–  See Section 5
 

Toxicological information

No experimental data available.

Inhalation

Can cause damage to the respiratory system.

Contact with skin

Causes burns (R35).

Contact with eyes

Causes burns (R35).

Ingestion

The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system.

Carcinogenicity

No evidence of carcinogenic effects.

Ecotoxicity

"In general, this cleaning agent  main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." and Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.

Mobility

Completely soluble in water

Persistence and Biodegradability

Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable.

Bioaccumulation Potential

Bioaccumulation of the components in this product is insignificant.

Other Adverse Effects

No environmental problems are expected when the product is used / handled correctly. 

Classification

Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.

Disposal considerations

"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." 

Proper Shipping Name

Potassium hydroxide, solution

 UN

 

 

 

 

 

Proper Shipping Name

Potassium hydroxide, solution

 

 

 

UN NO

1824 

 

 

 

Hazard Class 

Packing Group 

II 

Road/Rail (ADR/RID) 

 

Proper Shipping Name 

Potassium hydroxide, solution

 

 

 

ADR UN No

1824 

 

 

 

ADR Hazard Class 

Termcard 

80S1824 

Sear (IMDG) 

 

Proper Shipping Name 

Potassium hydroxide, solution

 

 

 

IMDG UN No

1824

 

 

 

IMDG Hazard Class

IMDG Pack Group 

II

 

IMDG EmS 

F-A, S-B 

IMDG subrisk 

NA 

 

IMDG Labels

 

IMDG Flash point

N/A

Air(ICAO/IATA) 

 

Proper Shipping Name

Potassium hydroxide, solution

 

 

 

ICAO UnNo

1824 

 

 

 

ICAO Hazard Class

ICAO Packing Group

II 

 

ICAO subrisk

N/A 

ICAO Labels 

8, CAO 

 

ICAO Flash point

N/A 

 

 

DOT/CFR(US Department of Transportation 

 

DOT Proper Shipping Name

Potassium hydroxide, solution

 

 

 

Hazardous Material 

Potassium hydroxide

 

 

 

Hazard Class

Identification Number

 

 

Product RQ (lbs)

3640 

DOT subrisk

N/A 

 

DOTLabels

DOTFlashpoint

N/A 

– Forbidden on passenger aircraft

Risk Phrases

Causes severe burns (R35)

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

(R35: Causes severe burns. R41: Risk of serious damage to eyes.) The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications – usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

Technical Bulletin

Description :

 

Holdbrite Plus is highly concentrated, comprising special detergents, surfactants, builders and corrosion inhibitors. It is specifically formulated for the effective removal of heavy duty residues and can be also applied by high-pressure spraying equipment. Holdbrite Rx can be quickly dissolved in water for removing lighter grease, oil, pet coke and dirt deposits. Compatible with most coated surfaces and dries leaving a good shine. Holdbrite Plus is water based, non-flammable, biodegradable Product.

 

Application :

 

Holdbrite PLUS  can be used for cargo hold and tanks cleaning and refrigeration vessels, as well as soot removal from Inert Gas Systems and general cleaning. It is effectively removes greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. Diluted, it removes lighter grease, oil, petcoke and dirt deposits.It is also suitable for applied on vertical surfaces and due to foaming properties, its increases the residential time, thus cleaning efficiency.

 

Usage and Dose:

 

Information are based on experience and are meant only as a guide since circumstances for each tank cleaning operation vary. They are not intended to interfere with the judgment of the vessel’s responsible personnel.Precleaning tanks with high-pressure warm water is highly recommended since large deposits of oil or other residues in the tank must be removed to ensure an effective cleaning operation.

 

General Cleaning

 

For general use, dilute Holdbrite Plus appropriately, depending on the contamination, and use conventional cleaning methods, such as brushing, scrubbing or hand spraying.

 

Removal of Soot from Inert Gas Systems (IGS)

 

Dilute from 5 to 20% of Holdbrite Rx in fresh water. Spray the solution onto the surface, using high-pressure cleaning equipment. When used with a hand sprayer, apply 1 litre of neat Holdbtire PLUS  per 12 m2. Allow the product to act and then rinse off with fresh water before drying. Allow solution to penetrate soil for about 30 minutes and then wash off thoroughly with high-pressure fresh water, heated up to 80°C. Always wash off before chemicals dry on the surface. Repeat the procedure, if contamination persists.

 

Cargo Tank and cargo hold cleaning

Holdbrite PLUS  is ideal for tank cleaning for most types of contamination. Suitable for epoxy, but not for zinc silicate coatings.The dosage rate for direct injection with tank washing machines is 1-20 litres per ton wash water (0.1-2.0%). For recirculation, use a rate of 1-20 litres per ton wash water (0.1-2.0%). For heavily soiled areas, a preliminary cleaning is required. If the surface is heavily contaminated, higher concentrations of the product in water can be used. When used for spot cleaning, apply by hand spraying neat or prepare a 20% solution, and allow the solution to penetrate soil for about 30 minutes before rinsing off with water. Always wash off before chemicals dry on the surface.

 

 

If Slip Coat Rxsol Hold Block or Rxsol Barrier Hold Coat is applied to the cargo hold surfaces prior to loading, the concentration of Holdbrite PLUS in the cleaning solution may be reduced.

 

Physical Properties

 

 Appearance Clear Liquid

 Odour Soft

 Boiling Point 109 °C

 Flash Point None

pH 12-13

Solubility Soluble in Water

Future & Benefit

 

 Effective cleaning of heavy duty residues from cargo hold tanks, decks, bulkheads, etc.

Heavy duty, water-based cleaner.

Efficient, multipurpose cleaning.

Highly concentrated: dilute for most cleaning needs.

Comprises special detergents, surfactants, builders and corrosion inhibitors.

Removes soot from Inert Gas Systems (IGS).

 Non-flammable.

Suitable to use with hot or cold water high pressure equipment.

Have a Question? Submit it here!

*
*

*

Online Inquiry
Loading...
Show Buttons
Hide Buttons