In Stock

Reverse Emulsion Breaker 2366 is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters.

Compare
SKU: RXSOL-40-4058-210 Category:
   

Description

Reverse Emulsion Breaker 2366 RX is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters.  The product may be used in conjunction with mechanical clarification methods such as gas flotation units and hydrocyclones.

Application:

Industrial waste water treatment.

Dose:

Direction For Use :

  • Reverse Emulsion Breaker 2366 (Polyfloc)c should be injected at a point in the system where agitation (natural or mechanically induced) is sufficient to mix with the fluid to be treated.
     
  • Location of the injection point for maximum efficiency will have to be determined empirically, but normally longer mixing times give the best clarification results.
     
  • If Reverse Emulsion Breaker 2366 (Polyfloc) is used in secondary treatment of oilfield waters, it should be injected upstream of the
    treating vessel in the pump suction or in the first cell.
     
  • Use concentrations can vary from 1 to 100 ppm. Initial use concentration can best be determined by jar tests, while the final use concentration will be determined in the system.
     
  • When Polyfloc is used in combination with other water clarification chemicals, injection points it should be separated enough to allow complete mixing of one before the other is introduced. Jar tests will be required to determine which order of addition is most efficient.
     
  • Clarification may in some systems may be more effective if the pH of the system is adjusted to less than 7.0.

Note:

Product Future :

  • Increases the settling rate of suspended solids.
  • Aids hydrocarbon recovery from water stream.
  • Aids in the coagulation of suspended particles prior to treatment in flotation cells or selling vessels.
  • May be used without the aid of other water clarification chemicals or in conjunction with other
  • chemicals for hard to treat water systems.
  • Cleans up environmentally unacceptable oily water.

Compliances: None
Precautions: Please refer to appropriate safety data sheet (SDS) prior to using this product.  FOR INDUSTRIAL USE ONLY

Additional information

MSDS

<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading1.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Product Name</td>
<td>
: Reverse Emulsion Breaker 2366 (Polyfloc)</td>
</tr>
<tr>
<td>
Part Number</td>
<td>
: RXSOL-40-4058-210</td>
</tr>
</tbody>
</table>
<p>
Company Details:<br />
RX MARINE INTERNATIONAL<br />
105, A wing , BSEL , TECH PARK.<br />
VASHI ,NEW BOMBAY 400703 INDIA</p>
<p>
Branch : Kandla, Mumbai, Kolkata, Chennai, Visakhapatnam, Fujairah UAE, Muscat Oman.</p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Phone</td>
<td>
+91 22 27815540 / 41 / 42</td>
</tr>
<tr>
<td>
Fax</td>
<td>
+91 22 2781 1318 :::AOH :0091 9821214367</td>
</tr>
<tr>
<td>
Email</td>
<td>
<a href="mailto:mail@rxmarine.com">123@rxmarine.com</a></td>
</tr>
<tr>
<td>
Website</td>
<td>
<a href="http://www.rxmarine.com/">www.rxmarine.com</a></td&gt;
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading2.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Name     of        Substance                         </td>
<td>
Cas Number</td>
<td>
EINECS No</td>
<td>
Wt.%</td>
</tr>
<tr>
<td>
Ingredients determined not to be hazardous Proprietory Blend</td>
<td>
Mixture</td>
<td>
 </td>
<td>
60 – 100%</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading3.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Signal Word                                                                    </td>
<td>
None</td>
</tr>
<tr>
<td>
Hazard Statements</td>
<td>
<p>
Not Applicable</p>
</td>
</tr>
<tr>
<td>
GHS Classification</td>
<td>
Not Applicable</td>
</tr>
<tr>
<td>
Label elements</td>
<td>
Not Applicable</td>
</tr>
<tr>
<td>
Precautionary statement(s) Prevention</td>
<td>
Not Applicable</td>
</tr>
<tr>
<td>
Precautionary statement(s) Response</td>
<td>
Not Applicable</td>
</tr>
<tr>
<td>
Precautionary statement(s) Storage</td>
<td>
Not Applicable</td>
</tr>
<tr>
<td>
Precautionary statement(s) Disposal</td>
<td>
Not Applicable</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading4.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Eye Contact</td>
<td>
If this product comes in contact with eyes:Wash out immediately with water.If irritation continues, seek medical attention.Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.</td>
</tr>
<tr>
<td>
Skin Contact</td>
<td>
If skin contact occurs: Immediately remove all contaminated clothing, including footwear. Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation.</td>
</tr>
<tr>
<td>
Inhalation:             </td>
<td>
If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures.Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor, without delay.</td>
</tr>
<tr>
<td>
Ingestion:                  </td>
<td>
If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Seek medical advice.</td>
</tr>
<tr>
<td>
Notes to Physicians</td>
<td>
Treat symptomatically.</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading5.png&quot; /></p>
<p>
 </p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Extinguishing media</td>
<td>
The product contains a substantial proportion of water, therefore there are no restrictions on the type of extinguishing media which may be used. Choice of extinguishing media should take into account surrounding areas.<br />
Though the material is non-combustible, evaporation of water from the mixture, caused by the heat of nearby fire, may produce floating layers of combustible  substances. In such an event consider: foam.</td>
</tr>
<tr>
<td>
 Fire Incompatibility</td>
<td>
None known.</td>
</tr>
<tr>
<td>
Fire Fighting</td>
<td>
Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves in the event of a fire. Prevent, by any means available, spillage from entering drains or water courses. Use fire fighting procedures suitable for surrounding area.</td>
</tr>
<tr>
<td>
Advice for firefighters</td>
<td>
Wear self-contained breathing apparatus. Wear full protective equipment.</td>
</tr>
<tr>
<td>
Fire/Explosion Hazard<br />
 </td>
<td>
The material is not readily combustible under normal conditions. However, it will break down under fire conditions and the organic component may burn. Not considered to be a significant fire risk. Heat may cause expansion or decomposition with violent rupture of containers. Decomposes on heating and produces toxic fumes of: carbon dioxide (CO2),hydrogen chloride,phosgene,other pyrolysis products typical of burning organic material.</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading6.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Personal precautions, protective equipment and emergency procedures</td>
<td>
<p>
Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoid inhalation, ingestion and contact with skin and eyes. Wear suitable personal protective equipment.Respiratory protective equipment.</p>
</td>
</tr>
<tr>
<td>
Minor Spills</td>
<td>
Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment.<br />
Contain and absorb spill with sand, earth, inert material or vermiculite.</td>
</tr>
<tr>
<td>
Major Spills<br />
 </td>
<td>
Minor hazard. Clear area of personnel. Alert Fire Brigade and tell them location and nature of hazard. Control personal contact with the substance, by using protective equipment as required.</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading7.png&quot; /><br />
 </p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Advice on safe handling</td>
<td>
DO NOT allow clothing wet with material to stay in contact with skin Limit all unnecessary personal contact. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. When handling DO NOT eat, drink or smoke.</td>
</tr>
<tr>
<td>
Storage</td>
<td>
Store in original containers. Keep containers securely sealed. Store in a cool, dry, well-ventilated area. Store away from incompatible materials and foodstuff containers.</td>
</tr>
<tr>
<td>
Advice on general occupational hygiene</td>
<td>
Wash hands after use. Do not to eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas.</td>
</tr>
<tr>
<td>
Suitable container</td>
<td>
<p>
Polyethylene or polypropylene container. Packing as recommended by manufacturer. Check all containers are clearly labelled and free from leaks.</p>
</td>
</tr>
<tr>
<td>
Storage incompatibility</td>
<td>
<p>
Avoid strong acids, bases.</p>
</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading8.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Engineering Control</td>
<td>
Effective exhaust ventilation system. Maintain air concentrations below occupational exposure standards.</td>
</tr>
<tr>
<td>
Personal   Protection</td>
<td>
<p>
Eye & Face Protection : Safety glasses with side shields; or as required, Chemical goggles. Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lenses or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience.</p>
<p>
Skin Protection :  Hands/feet protection<br />
Wear chemical protective gloves, e.g. PVC. Wear safety footwear or safety gumboots, e.g. Rubber The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary from manufacturer to manufacturer. Where the chemical is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time for substances has to be obtained from the manufacturer of the protective gloves and.has to be observed when making a final choice. Personal hygiene is a key element of effective hand care</p>
</td>
</tr>
<tr>
<td>
Exposure Limits:<br />
 </td>
<td>
<table border="1" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Ingredients</td>
<td>
Material Name</td>
<td>
 TEEL-1</td>
<td>
TEEL-2</td>
<td>
TEEL-3</td>
</tr>
<tr>
<td>
Polyfloc</td>
<td>
    —-</td>
<td>
Not Available</td>
<td>
 Not Available</td>
<td>
Not Available</td>
</tr>
<tr>
<td>
Water </td>
<td>
   NA</td>
<td>
NA</td>
<td>
NA</td>
<td>
NA</td>
</tr>
</tbody>
</table>
</td>
</tr>
<tr>
<td>
Hygiene measures</td>
<td>
Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard.</td>
</tr>
<tr>
<td>
Other protection</td>
<td>
Overalls Eye Wash Unit</td>
</tr>
<tr>
<td>
Thermal hazards</td>
<td>
Not Available</td>
</tr>
</tbody>
</table>
<p>
       <img alt="gloves" src="http://content.rxmarine.com/images/msds/icons/gloves.jpg&quot; />                   <img alt="suit" src="http://content.rxmarine.com/images/msds/icons/suit.jpg&quot; />                </p>
<p>
            Gloves                       Suit                          </p>
<p>
  <br />
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading9.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Form        </td>
<td>
Viscous Liquid</td>
</tr>
<tr>
<td>
Appearance</td>
<td>
Clear Pale yellow, mobile liquid;</td>
</tr>
<tr>
<td>
Odour</td>
<td>
Ammonical</td>
</tr>
<tr>
<td>
Viscosity @ 20°C</td>
<td>
400 – 800 cp</td>
</tr>
<tr>
<td>
Flash Point</td>
<td>
>94°C</td>
</tr>
<tr>
<td>
Boiling Point</td>
<td>
>100°C</td>
</tr>
<tr>
<td>
Freezing Point</td>
<td>
-12°C</td>
</tr>
<tr>
<td>
pH</td>
<td>
3.5 – 4.10</td>
</tr>
<tr>
<td>
Evaporation rate</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Flammability (solid, gas)</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Upper explosion limit</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Lower explosion limit</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Explosive properties</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Vapor pressure</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Relative vapor density</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Relative density</td>
<td>
1.14 – 1.20</td>
</tr>
<tr>
<td>
Water solubility</td>
<td>
Soluble</td>
</tr>
<tr>
<td>
Solubility in other solvents</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Partition coefficient: octanol</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Autoignition temperature</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Thermal decomposition</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Viscosity, kinematic</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Explosive properties</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Oxidizing properties</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Molecular weight</td>
<td>
No data available</td>
</tr>
<tr>
<td>
VOC</td>
<td>
No data available</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading10.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Recativity                                            </td>
<td>
No additional information available</td>
</tr>
<tr>
<td>
Stability</td>
<td>
Stable under normal  conditions.</td>
</tr>
<tr>
<td>
Possibility of hazardous reactions</td>
<td>
No dangerous reaction known under conditions of normal use.</td>
</tr>
<tr>
<td>
Incompatible materials</td>
<td>
Strong acids. Strong bases. May be corrosive to metals</td>
</tr>
<tr>
<td>
Hazardous Decomposition</td>
<td>
<p>
fume. Carbon monoxide. Carbon dioxide.</p>
</td>
</tr>
<tr>
<td>
Condition to Avoid</td>
<td>
None Known</td>
</tr>
<tr>
<td>
Polymerization</td>
<td>
Will not occur.</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading11.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Route of Exposure</td>
<td>
Inhalation, Eye contact, Skin contact</td>
</tr>
<tr>
<td>
Inhaled                                     </td>
<td>
<p>
Not normally a hazard due to non-volatile nature of product.</p>
</td>
</tr>
<tr>
<td>
Ingestion</td>
<td>
Ingestion Accidental ingestion of the material may be damaging to the health of the individual.Ingestion may result in nausea, abdominal irritation, pain and vomiting</td>
</tr>
<tr>
<td>
Skin Contact</td>
<td>
The material is not thought to be a skin irritant (as classified by EC Directives using animal models). Temporary discomfort, however, may result from prolonged dermal exposures.</td>
</tr>
<tr>
<td>
Eye</td>
<td>
Although the liquid is not thought to be an irritant (as classified by EC Directives), direct contact with the eye may produce transient discomfort characterised by tearing or conjunctival redness (as with windburn).</td>
</tr>
<tr>
<td>
Chronic Exposure</td>
<td>
Chronic Long-term exposure to the product is not thought to produce chronic effects adverse to the health (as classified by EC Directives using animal models);nevertheless exposure by all routes should be minimised as a matter of course.</td>
</tr>
<tr>
<td>
Acute oral toxicity</td>
<td>
No Data available</td>
</tr>
<tr>
<td>
Acute inhalation toxicity</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Acute dermal toxicity</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Classification</td>
<td>
The classification was made by the conventional (calculation) method of Dangerous Preparations Directive(1999/45/EC)</td>
</tr>
</tbody>
</table>
<p>
<br />
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading12.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Environmental Effects</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Toxicity to fish</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Toxicity to daphnia  and others</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Toxicity to algae                      </td>
<td>
No data available</td>
</tr>
<tr>
<td>
Biodegradability</td>
<td>
 > 70% (28 d)</td>
</tr>
<tr>
<td>
Persistence and degradability</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Bioaccumulative potential</td>
<td>
No data available</td>
</tr>
<tr>
<td>
Mobility in soil</td>
<td>
No data available</td>
</tr>
</tbody>
</table>
<p>
 <img alt="" src="http://content.rxmarine.com/images/msds/header/heading13.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Remarks</td>
<td>
Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.</td>
</tr>
<tr>
<td>
Waste Disposal</td>
<td>
The product should not be allowed to enter drains, water courses or the soil. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations. Dispose of wastes in an approved waste disposal facility</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading14.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Land transport (ADG):</td>
<td>
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS</td>
</tr>
<tr>
<td>
Air transport (ICAO-IATA / DGR)</td>
<td>
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS</td>
</tr>
<tr>
<td>
Sea transport (IMDG-Code / GGVSee)<br />
 </td>
<td>
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS</td>
</tr>
<tr>
<td>
HAZCHEM</td>
<td>
NO</td>
</tr>
<tr>
<td>
Marine pollutant</td>
<td>
NO</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading15.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Regulations               </td>
<td>
In accordance with REACH Regulation (EC) No 1907/2006 as last amended with respect to SDS provisions by Commission Regulation (EU) 2015/830.<br />
Safety, health and environmental regulations / legislation specific for the substance or mixture.<br />
 </td>
</tr>
<tr>
<td>
Chemical safety assessment</td>
<td>
National Inventory Status<br />
Australia – AICS Y<br />
Canada –  DSL Y<br />
Canada – NDSL N (water)<br />
China – IECSC Y<br />
Europe – EINEC / ELINCS / NLP Y<br />
Japan – ENCS Y<br />
Korea – KECI Y<br />
New Zealand – NZIoC Y<br />
Philippines – PICCS Y<br />
USA – TSCA Y</td>
</tr>
<tr>
<td>
Further information</td>
<td>
None</td>
</tr>
</tbody>
</table>
<p>
<img alt="" src="http://content.rxmarine.com/images/msds/header/heading16.png&quot; /></p>
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Other Information</td>
<td>
 
<p>
The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International  has been advised of the possibility of such damages.</p>
</td>
</tr>
</tbody>
</table>

Technical Bulletin

Have a Question? Submit it here!

*
*

*

Online Inquiry
Loading...
Show Buttons
Hide Buttons