Title
Floor Stripper 5 Ltr
SKU
RXSOL-13-1041-005
Supply Location::
Locations
Floor Stripper manufacturer and supplier in Kolkata Haldia, Mumbai JNPT, Kandla Mundra, Chennai Ennore, Visakhapatnam Gangavaram, Fujairah, Dubai, Abudhabi, Sharjah.
Category
Floor Care ( Polish / Cleaner ) -13
SHORT DESCRIPTION:::
PRODUCT REMARK:::
>
TAG IDENFIFICATION:::
FIELD NOTE:::
Heavy Duty Floor Stripper contains concentrated alkaline low foaming compound to clean hard floor. Uses of Floor stripper not only save labour time but also avoid excess scrubbing mechanism, which is resulting scratch and damaging the surface.
Remarks
Tag Identification
Note
RXSOL-13-1041-005 is a superior heavy duty and highly concentrated SYNTHETIC CHEMICAL blend of detergents, alkaline salts, emulsifier and chelating agents. A new exciting product with a 3-in-one fuction.
As a floor stripper for all types of waxes and furnishes .
As a degreaser where regular cleaners are unsuitable.
Elimates the need to buy and stock duplicate product .
Technical Specifications
Application
Excellent stain remover for use on tiles, concrete, wood and other types of hard floor .
Floor Polish Stripper
This is a heavy duty floor polish stripper.
It will remove all kinds of floor polishes with ease. It does not matter whether there is 1 coat of floor polish or 10, GLINT STRIP will remove them quickly and easily.
It can be used on lino, marley tiles, quarry tiles, wood block, etc.
Industrial Area
Marine Chemicals covers full range of ship maintenance and cleaning chemicals. RX MARINE INTERNATIONAL is one of largest share market holder of marine chemicals in India and UAE. We have more then thousends of marine chemical's customer world wide, Our product range of marine chemicals covers full range of ship Hold cleaning, Ship Tank Cleaning, Ballast water tank treatment as well as its cleaning chemicals. And many more marine chemicals also covers full range of water treatment chemicals including Boiler water and cooling water treatment chemicals.
Our valuable marine chemicals classified links are given below :::
Ballast Tank cleaning and treatment chemicals : http://rxmarine.com/BallastTank/treatment/chemicals
Cargo Bulk Ship Hold cleaning chemicals including slip barrier coat : http://rxmarine.com/HoldSolution-22
Tank Cleaning marine chemicals : http://rxmarine.com/TankCleaner-20
Boiler Water Treatment marine chemicals : http://rxmarine.com/catalog/137
Cooling Water Treatment marine Chemicals : http://rxmarine.com/catalog/138
Deck Cabin Galley Maintenance Chemicals : http://rxmarine.com/Deck/Engine/Rigs/OilField/Chemicals
Degreaser : http://rxmarine.com/Degreaser/moya/general/bilge/coldwash
Drain Cleaner several types : http://rxmarine.com/catalog/132
Electrical Parts / Motor Cleaning chemicals : http://rxmarine.com/catalog/133
Engine Maintenance cleaning marine chemical : http://rxmarine.com/catalog/134
Evaporator Treatment Chemicals : http://rxmarine.com/EvaporatorTreat-51
Floor Cleaning / Polish : http://rxmarine.com/FloorCare/clenaer/polish/disinfectant/stripper/stain/rx
Fuel Oil Treatment marine Chemical : http://rxmarine.com/FuelTreatment-70
Hand Cleaning Paste / Other cleaner : http://rxmarine.com/HandWash/Personalcare-14
Oil Spill dispersant / Cleaning marine chem : http://rxmarine.com/OilSpillChemAccessory-17
Paint Cleaner / Remover : http://rxmarine.com/PaintPrintcleaner/solvent-18
RO ( Reverse Osmosis ) Chemicals : http://rxmarine.com/ROChemicals-33
Rust Cleaning Chemicals : http://rxmarine.com/catalog/131
Scale Remover / Descaling Chemicals : http://rxmarine.com/ScaleRemover-11
Seawage Treatment Chemicals : http://rxmarine.com/CoolingWater/Treatment
Test Kit for Boiler Water / Cooling / Sewage : http://rxmarine.com/TestKit-62
Wall Wash Test Kit and Other reagent : http://rxmarine.com/WallWashTestKit-63
Rigs Oil field Chemicals : http://rxmarine.com/catalog/120
And we are keeping more then 3000 products at our various loaction and branches, Pl. share this link http://rxmarine.com/Products . Our product covers latest research and formulation as we run our marine chemicals division since 1995 under powerful and top notch leadership. We always providing our customer best value of product to reduce there expances for cleaing and maintenance. Our average sale of marine chemicals everyday is 18000 Ltr, Its everyday consumption among our customer always givng new direction to maintain best product in the market.
Email : mail@rxmarine.com
Dose
How to strip a floor :::---
The purpose of stripping a floor is to remove all the old floor finish off the floor. Over time floor finish can turn yellow and can build a haze. If burnishing or polishing your floor does not correct this, it's probably time to strip your floors and do a new recoat. Stripping a floor can be a quick and clean procedure if you have the correct tools for the job. The use of a good floor stripper will make your life much easier, it's better to have the floor stripper remove the wax rather than using hard labor. Removing old floor finish is basically a three step process:
Apply the floor stripper and agitate it.
Remove the floor stripper from the floor.
Rinse the floor and neutralize the floor stripper.
Procedure:
Make sure that your floor has been prepared for stripping. Clean the floor removing as much dirt and debris as possible.
After you have the floor has been prepared vacuum or dust mop the floor to remove any dust. We recommend that you spray your duct mop with dust mop treatment to remove as much dust as possible. Make sure to remove anything stuck to the floor because this will gum up or rip the floor pad.
Make sure that the floor are you are stripping does not and will not have traffic moving through it. Use warning signs to make sure the area where you are stripping is marked out so that everyone is aware of the area.
Stripping a floor requires a mop bucket, cotton or blended mop, floor machine (175-300rpm's) and a black or hi-pr stripping floor pad. Follow the specifications for applying the floor stripper. Fill the mop bucket up 1/2 way with floor stripper. Dip the mop into the stripper a lightly wring. Break the floor down into 6' by 6' sections and start applying the stripper to the floor at the furthest corner of the room. Apply the stripper in a figure 8 motion overlapping each stroke by about an inch. After you have applied the stripper let the it sit on the floor for 5-7 minutes. This will give the stripper a chance to react with the floor finish.
Next place a hi-pro or black floor pad on your floor machines. When stripping a floor move the floor machine back and forth on the floor overlapping by at least 1 inch on each pass. As the floor finish is removed from the floor it will become duller. You may need to spend extra time on areas with finish buildup. The main traffic area on the floor will have less buildup than low traffic areas.
Once used the floor machine on the 6' by 6' area remove the stripper from the floor using either a blended mop of wet dry vacuum preferably one that has a front mount squeegee. Do not let the stripper finish mixture dry. if the area does dry apply more stripper to reloosen the finish.
After the you have removed the floor stripper from the floor rinse the floor with warm water. Rinse the floor two more times with cold water.
After the third rinse with plain water, rinse the floor with a floor stripper neutralizer. Neutralizer will reduce the white residue left by the floor stripper so that the floor finish can adhere to the floor much better.
After the neutralizer dries check for white residue on the floor using a black towel. If residue still exists rinse one more time with cold water. Once all these steps have been completed check the floor for shiny spots. If shiny spots are evident you may need to re-strip these areas.
Useful Area
Keywords
