Title
Corrosion and Scale Inhibitor Phosphate Based
SKU
RXSOL-43-4029-200
Supply Location::
Locations
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System Liquid manufacturer and supplier in Mumbai, Turbhe Pawana MIDC, Gandhidham, Visakhapatnam, Chennai Ennore, Kolkata, Haldia, Ajman, Fujairah, Dubai, Sharjah, Dubai, Muscat, Oman, Sohar, Barka, Canada, SUDAN, Yemen
Category
Cooling Water Chemical-43
SHORT DESCRIPTION:::
PRODUCT REMARK:::
>
TAG IDENFIFICATION:::
FIELD NOTE:::
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System. Phosphates and zinc stabilizer for anti-scale / anti-corrosion water treatment formulations. Also demonstrates excellent efficiency in the presence of soluble iron where acrylic polymers fail. Excellent dispersant for iron oxides.
Remarks
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System product does not require additional acid treatment.
ADVANTAGES of RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System
Clean Surfaces - Maximum heat transfer -
Its regular doses increases Higher efficiency
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System - Reduced Maintenance down time - Increased production
Non Toxic - Easy and Safe in use
Tag Identification
RXSOL ROCCORrx OC is scientifically formulated to keep clean open recirculating systems and also prevent scale formation. Chemically ROCCORRX OC will disperse scale and corrosive products, silt etc, and can be used as an anti-foulant along with other treatments.
Easy to feed RXSOL ROCCORrx OC directly from the drum or from a stock dilution tank. The slug feed method can also be used.
RXSOL ROCCORrx OC is a highly concentrated cooling water treatment product, Its small dosage is from 500 ml – 1 Ltr per 10 Tons of Cooling Water.
Note
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System compatible with nylon, neoprene or rubber jointings.
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System is a combined dispersant and anti-foulant and corrosion inhibitor which is specially formulated for the prevention of scale, deposits and corrosion in open fresh water, cooling systems.
It is formulated from Polyphosphates, organophosphates and Polyacrylates.
Technical Specifications
PHYSICAL CHARACTERICS
Appearance : Clear Liquid - Also available in PINK colour
Specific Gravity : 1.10 to 1.20
Flash Point : Non Flammable
Freezing Point : 0 Degrees Cent.
Application
Corrosion Inhibitor OPEN Cooling System scientifically formulated to keep clean open recirculating systems and also prevent from scale formation . Chemically Corrosion Inhibitor OPEN Cooling System will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments.
Excellent scale inhibition for a variety of applications including cooling circuits, boilers and RO units.
It is widely used in Boilers, cooling water and membranes
Dose
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System is highly concentrated cooling water treatment product, Its small dosage from 0.5 – 1 liter per 10 Tons of Cooling Water. The source of water also directly affecting its dosage as The dosage depends on the quality of the supply water ( Total hardness and Chloride content as low as possible) . Control is by simple colourismetric test.
Optimum result of COOLING SYSTEM can be obtained by maintaing pH level 8 to 8.5 and Total phosphate level should be maintained between 20 and 30 ppm.
Feel free to ask for RXSOL PHOSPHATE TEST KIT, RXSOL HARDNESS TEST KIT, RXSOL CHLORIDE TEST KIT. We are keeping full range of TEST KIT.
