Antifreeze for gas turbine compressor washing exporter and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Dubai, Ajman, Sharjah Abudhabi, Muscat Barka Ruwi Sohar, Oman, Canada, Sudan, Yemen, Michigan USA
#AntifreezeGasTurbineCompressorWashingUAE
#AntifreezeGasTurbineCompressorWashingOMAN
#AntifreezeGasTurbineCompressorWashingINDIA
SURAT CHEMICAL TAG:
RXSOL Gas Turbine Compressor Wash Antifreeze is a glycol-based antifreeze additive designed for use in gas turbine compressor washing and rinsing fluids under low-temperature operating conditions. It helps prevent freezing of the cleaning solution during compressor washing and rinsing operations when ambient temperatures fall below the normal operating range.
The product is based on technical-grade glycols, selected for low volatility and relatively low toxicity compared with many alternative glycol-based antifreeze agents. It is intended to be added to the compressor wash solution in accordance with the recommendations of the gas turbine Original Equipment Manufacturer (OEM).
- Freeze Protection: Helps reduce the risk of freezing in compressor washing and rinsing fluids at low ambient temperatures.
- Low Volatility: RXSOL Turbine Wash Antifreeze has a relatively low vapour pressure under normal operating conditions.
- Water Miscibility: Mixes readily with water to facilitate preparation of compressor washing solutions.
- Controlled Dilution: Allows the antifreeze concentration to be adjusted according to ambient temperature and applicable OEM recommendations.
- Versatile Application: Suitable for incorporation into compatible aqueous compressor cleaning and rinsing solutions.
How to use RXSOL Gas Turbine Compressor Washing Antifreeze along with RXSOL GTC 1000 / RXSOL 27 Gas Turbine Cleaner?
The product is intended for use as an antifreeze additive in aqueous cleaning and rinsing fluids used during gas turbine compressor washing.
It may be used where low ambient temperatures create a risk of freezing during the washing, rinsing, or associated operating procedures.
The required concentration depends on the ambient temperature, the composition of the cleaning solution, and the specific requirements of the gas turbine manufacturer.
Important: Always follow the gas turbine OEM's instructions regarding antifreeze selection, concentration, compatibility, and compressor washing procedures. Do not assume that the recommended mixture is suitable for every turbine model or cleaning formulation.
Recommended Dilution for Gas Turbine Compressor Washing
The following table provides the recommended dilution of RXSOL GTC 1000 / RXSOL 27 Gas Turbine Cleaner concentrate and water/RXSOL Turbine Wash Antifreeze GT for a total prepared mixture of 100 litres.
|
Outside Air Temperature |
RXSOL GTC 1000 / RXSOL 27 Concentrate (L) |
Water (L) |
MPG (L) |
Total (L) |
|---|---|---|---|---|
|
Above +5°C |
20 |
80 |
0 |
100 |
|
+5°C to −5°C |
20 |
60 |
20 |
100 |
|
−5°C to −20°C |
20 |
40 |
40 |
100 |
|
−20°C to −30°C |
20 |
30 |
50 |
100 |
|
−30°C to −40°C |
20 |
20 |
60 |
100 |
|
Property |
Typical Specification |
|---|---|
|
Appearance |
Clear, colourless liquid |
|
Odour |
Practically odourless to faint characteristic odour |
|
Solubility in Water |
Completely miscible |
|
Relative Density at 20°C |
Approximately 1.036-1.040 |
|
Boiling Point |
Approximately 188°C |
|
Flash Point |
Approximately 99-120°C, depending on test method |
|
Vapour Pressure |
Low at ambient temperature |
Antifreeze for gas turbine compressor washing manufactured and supplied as a concentrate for dilution at site. Get cost effective Antifreeze for gas turbine compressor washing liquid and mix it as per dilution given below with RXSOL Gas Turbine Cleaner GTC 1000 or RXSOL 27 Gas Turbine Cleaner.
Complete dilution and mixing chart is given for RXSOL Antifreeze for gas turbine compressor washing liquid: RXSOL Turbine Wash Antifreeze GT
Mixing Procedure:
- Determine the expected ambient temperature during the compressor washing and rinsing operation.
- Confirm the appropriate antifreeze concentration with the gas turbine OEM.
- Measure the required quantities of RXSOL GTC 1000 / RXSOL 27 Gas Turbine Cleaner concentrate, water, and technical-grade MPG.
- Prepare the mixture using a clean, compatible mixing vessel and ensure uniform blending.
- Verify the mixture's suitability and freeze protection before use, where required by the operating procedure.
