RODINE Sol IC600
SKU
RXSOL-25-1098-050
Supply Location:
SURAT CHEMICAL TAG:
Category
Variations
RODINE Acid Corrosion Inhibitor IC-600 is a highly effective broad spectrum acid corrosion inhibitor designed for use in well acidizing, acid fracturing and industrial cleaning operations. The product is recommended for use in hydrochloric acid, hydrofluoric acid, HCl/HF mud acids and organic acids. RODINE Acid Corrosion Inhibitor IC-600 provides excellent corrosion protection of surface and down hole tubular goods and associated equipment typically used in acidizing operations and has proven effective at temperatures up to 350oF. IC-600 does not contain any organic halides or heavy metals known to be harmful to process equipment or refinery catalysts.
Note
Shipping, Handling and Storage :
RODINE Acid Corrosion Inhibitor IC-600 is available in 55 gallon drums, tote tanks and bulk tank wagons. As with any industrial chemical, keep out of reach of children and avoid prolonged contact with skin and eyes. In case of skin or eye contact, flush the exposed area with copious amounts of water. A material safety data sheet outlining proper handling of this product is available upon request, or will be forwarded upon the purchase of the product.
Typical Properties :
| Property | Value |
|
Density, lbs/gal 68°F (20°C)
|
8.6 lb/gal. |
| Pour Point °F | -30 |
| Ionic Charge | Cationic |
| pH | 2.5-3.5 |
| 15% HCl | Soluble |
| Solubility ,Water | Soluble |
| Hydrocarbon | Dispersable |
| Appearance | liquid |
Recommended Application :
RODINE Acid Corrosion Inhibitor IC-600 should be added to the acid of choice and thoroughly mixed. Required load rates are dependant upon acid concentration and type, down hole temperature, the presence of other additives and the length of time the acid will be in contact with the tubulars. General loading rates for hydrochloric acid with J-55 steel is presented in the chart below. Pilot testing is recommended to determine optimum IC-600 loading in specific treatments. At temperatures in excess of 250oF in 15% HCl and in excess of 225 oF in 28% HCl and 12-3 mud acid the use of formic acid as an intensifier is recommended.
Recommended load rates :
| Temperature oF |
15% HCl
gpt AI-260
|
28% HCl gpt AI-260 |
| <150 | 1 Gallon | 4 Gallons |
| 150 – 175 | 2 Gallons | 6 Gallons |
| 175 - 200 | 4 Gallons | 10 Gallons |
| 200 - 250 | 4 Gallons | 12 Gallons |
| 250 – 300 | 6 Gallons | 15 Gallons |
| 300 – 350 | 10 Gallons |
20 Gallons |
