Electrosol Electrical Parts Non Flammable Cleaner Manufacturer and supplier in Mumbai, Gandhidham, Chennai, Ennore, Visakhapatnam, Manglore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, UAE Middle East, Ruwi Ghala, Barka Oman MUSCAT Sohar, Sudan, Yemen, Nairobi Kenya, Canada
SURAT CHEMICAL TAG::
Excellent Cleaner for Electric Parts - Electrosol NON FLAMMABLE
Electrical Non Flammable Contact Cleaner is a specialized non-flammable cleaning solvent specialized to clean Electrical Equipment. A well balanced blend of non-chlorinated degresol Having super Degreasing power with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment. It provides immediate and efficient removal with a high evaporation rate.
Excellent Electrical / Electronic Panel cleaner and degreasing chemicals to removes residues of oils, greases and machine coolant from machined parts, castings, panels and electrical/electronic components
RXSOL-16-1076-020 Electrosol NF Motor Cleaner Designed to provide a versatile degreasing solution for all manufacturing, maintenance, inspection and surface preparation needs
RXSOL-16-1076-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
RXSOL-16-1076-020 is also used in sensitive aerospace applications
Characteristics :-
- High dissolving and penetration action.
- Excellent degreasing and emulsification power .
- Safe on applied electrical insulation.
- Non-corrosive. it is safe to use on painted or varnished metal surfaces.
- Without chlorinated solvents.
- To be used as an alternative to conventional electric cleaners
Product Properties
Appearance Clear Colourless LiquidVapor Density : Heavier than air
Flash point 63°C (Closed Cup) Stability : Very stable understandard, Normal conditions
Compatibility
Metal
Plastic
RubberNo known effect
No Known effect
May swellNote: After use the product must always be well sealed in the drum.
PACKAGING Order NoSize (in kgs./lts.)
RXSOL-16-1076-02025, 50, 210 Lts
RXSOL-16-1076-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1076-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1076-025 . Never use RXSOL-16-1076-025 on a running generator or motor.
RXSOL-16-1076-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
#Electrosol_ElectricalCONTACTcleaner
Either remove rubber and plastic parts from component or test on small area for any reaction before cleaning.
After cleaning motors or generators insulation resistance to ground should be tested to check that it is within its specified limits. Sprayers: a range of spray equipment is available for use with Electrosolv-E and other solvents.
Directions for use
RXSOL Electrosol must only be used in sufficient ventilated areas. RXSOL Electrosol should always be used undiluted. It can be applied by brush, swab or as a fine spray using suitable hand held spray equipment.
NOTE: Never open flame when using fine spray.
Small components be cleaned y brief immersion in a bath of RXSOL Electrosol. The most suitable way of applying RXSOL Electrosol is by using hand spray or syphon spray gun. Once the deposits of dirt and grease have been flushed away with RXSOL Electrosol the remaining solvent may be evaporated by using clean compressed air at low pressure and high volume.
DIP Cleaning Immersion Method is best for Small parts, While SPRAYING method is BEST cleaning method for Equipments and Parts Cleaning.
After Application and Cleaning of equipment, Wipe thorugh cloth or BLOWN the air for fiew minutes till DRY.
Never use ELECTROSOL on a WORKING AND Running Motor / Generator area.
USE Electrosol concentrated form only, Never Dilute before application.
Useful to clean all electrical parts and equipment components. Avoid to use on rubber and plastic.
Use in Well Ventillated AREA.
Never USE flame, during usage of ELECTROSOL Electrical Contact Cleaner.
Advanced formulation to clean sensitive equipment or components.
#ElectrosolNFMotorCleaner_supplier_in_Navlakhi
#ElectrosolNFMotorCleaner_supplier_in_Okha
#ElectrosolNFMotorCleaner_supplier_in_Anjar
#ElectrosolNFMotorCleaner_supplier_in_Ankleshwar
#ElectrosolNFMotorCleaner_supplier_in_Bharuch
#ElectrosolNFMotorCleaner_supplier_in_Hazira
#ElectrosolNFMotorCleaner_supplier_in_Surat
#ElectrosolNFMotorCleaner_supplier_in_Gujarat