Mordant Pre Treatment Etching Wash
SKU
RXSOL-18-1092-025
Supply Location:
Locations
Mordant Pre Treatment Etching Wash manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Mordant Pre Treatment Etching Wash at a competitive price from us. We have ready stock of Mordant Pre Treatment Etching Wash in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
SURAT CHEMICAL TAG:
Category
Variations
Mordant Pre Treatment Etching Wash is ideal as a pre-treatment of new galvanised steel where blasting or abrasion is not possible.
Mordant Pre Treatment Etching Wash may be overcoated with a wide range of protective coating systems.
Mordant Pre Treatment Etching Wash may be used to give adhesion of high temperature coatings to new galvanised steel.
Mordant Pre Treatment Etching Wash changes colour on application to black to indicate the effectiveness of primary treatment.
Not recommended for immersed conditions.
| PRODUCT NAME | : | Mordant Pre Treatment Etching Wash |
| Odour | : | Characteristic Odour |
| Solubility in water | : | COMPLETE , ( 5.48 g/mL ) |
| Density | : | > 1 g/cm3 |
| Flashpoint | : | 31 deg C |
| Skin absorption/irritation | : | YES |
To get the best results the surfaces to be etched should be sound, clean & dry.
Ensure surfaces being painted are dry, and cleaned to remove all contaminants.
Before applying your Mordant T Wash Solution ensure you are wearing suitable protection including gloves & eye protection. As with all our products this is a professional product for getting a professional result.
How to use Mordant Pre Treatment Etching Wash
- Apply Mordant Pre Treatment Etching Wash & allow to turn black. Once this has happened, wash with clean water. This is usually after it is fully dried. Any areas that havent turned black, (usually due to surface contamination) should be abraded using a suitable abrasive paper, then re-apply, however avoid over application as any pooling may result in the formation of fine brown deposits of copper. After rinsing with clean water and allowing to dry before priming.
- Very Important Once the pre-treated Mordant Pre Treatment Etching Wash surface has dried, it should be over painted with the appropriate metal primer within 48 hours or contamination may occur, affecting the end result.
- Mordant Pre Treatment Etching Wash should be stored between 5 -25 degrees C and when not in use, cans should be kept sealed. For guidance, Mordant Pre Treatment Etching Wash has a 12 month shelf life from the delivery date in their original containers.
