Title
ANTI SCALANT for WASTE WATER
SKU
RXSOL-40-9103-220
Supply Location::
Locations
ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED manufacturer and supplier in Yemen, Sudan, Nairobi, Muscat Sohar, Oman, Fujairah, Dubai, Sharjah, Abudhabi, UAE Middle East, Mumbai, Kandla Surat Gandhidham Gujrat, Chennai Ennore, Visakhaptnam, Kolkata West Bengal, Varanashi, Tata, Patna, Canada
Category
Sewage Chemicals Treatment-40
SHORT DESCRIPTION:::
PRODUCT REMARK:::>
TAG IDENFIFICATION:::
FIELD NOTE:::
Scale Inhibitor Antiscalant is specially designed to inhibit the scale formation ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION
It is a stabilized solution of organic phosphonates and polyacrylates with high dispersing effect. Scale Inhibitor Antiscalant is an excellent inhibitor for calcium sulphate and calcium carbonate. A further advantage is the excellent stabilizing effect for barium and strontium sulphate. In addition even iron may be stabilized. The contained copolymers act also as a dispersing agent for organic contaminants and metal oxides.
Technical Specifications
| Appearance | : Clear, dark yellow liquid |
| Density | : 1.14 – 1.16 g/cm3 |
| Viscosity | : Approx. 50 mPa.s |
| pH-value | : 4.8 – 5.3 |
| Boiling Point | : 105° C |
| Freezing Point | : -10° C |
| Solubility in water | : unlimited |
Application
Scale Inhibitor Antiscalant is highly efficient scale inhibitor for Scale Inhibitor Antiscalant is specially designed to inhibit the scale formation ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION
Dose
The dosage is controlled proportionally by Standard metering pumps are used. Fitting materials are PE, PP or coated steel. In order to avoid biological fouling, the containers have to be cleaned from time to time with a 10 % sodium bisulfite solution or a sodium hydroxide water solution solution at pH=13.
Scale Inhibitor Antiscalant can be diluted with water in any ratio. However, it is recommended to inject the antiscalant undiluted or as solution up to 10 %. The diluted solutions have to be consumed within 48 hours after preparation. The required dosage level depends on the operating conditions and water composition and varies in the range of 1 – 10 ppm as delivered.
