HCF Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of HCF Cleaner at a competitive price from us. We have ready stock of HCF Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
SURAT CHEMICAL TAG::
Specially formulated to soften up / remove baked-on drying oils and also used after the animal and vegetable oils, fish oils, tall oils, tung oil etc. It is a low toxic product with an exceptional solvency power on soil & oily matter.It is free from hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials.
RXSOL-20-2007-025 is a very strong low foaming multipurpose cleaner.
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-025 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents.
Note:- Completely miscible with sea water.
Neutral HCF is free from solvents to clean Vegetable, Animal oil etc from Ship and marine Tanks. Excellent neutral tank cleaner cum degreaser. This product is most popular among tanker operating charter and shipping agent.
COLD water is recommended for drying or semi-drying oils to flush the tank as prewash. Chemical expert suggest that cold water should be carried out immediately after discharge of cargo to prevent hardening of oil residues. Otherwise if oil is nondrying then Prewash of the tank with hot water at 50˚C is good decision to achieve BEST cleaning result.
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate coatings and from most metal surfaces (ferrous alloys, tin, zinc, aluminium and galvanized surfaces).
First of all flush the system with water to stop evaporation rates and polymerization effect of oil, then can be adopt most economical method of using RXSOL-20-2007-025 is by direct injection followed by recirculation washing, using tank cleaning machines.
We are classified as Marine Chemical Products and Tank Cleaning Chemicals supplier. We cover the full range of Marine Cleaning Chemicals which is Heavy Duty and economical to use. We are keeping ready stock of Industrial Chemical Products, marine cleaning maintenance Chemicals, Boiler water treatment Chemicals, Cooling Water Treatment Chemicals, Fuel Oil treatment, Deck Cleaning Items, Oil Spill Dispersant, Tank Cleaner, Tank Clean, Rig wash, Carbon Remover, Deck Cleaner, Teak Renewer, Epoxy paint Solvented, water free hand cleaner, water free hand wash, biological toilet cleaner, all pupose cleaner, Oil Spill Dispersant, OSD Type I II, Heavy Duty Degreaser, Rigwash, Aqua Break, Sea-cleaner Plus, Alkaline Safety liquid etc at all INDIAN coastal and in Middle East.
Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-025 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions are followed when handling / spraying HCF **
Injection Method:– Not applicable.
Re-circulation Method:–Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower Butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.**
RXSOL-20-2007-025 HCF Cleaner is a very strong low foaming multipurpose cleaner.