Title
Water Filter Corrosion Preventive
SKU
RXSOL-20-3113-025
Supply Location::
Locations
Ready Stock of Water Filter Corrosion Preventive in Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai Tuticorin INDIA, Fujairah, Muscat, Kenya, Canada
Category
Tank Cleaner-20
SHORT DESCRIPTION:::
PRODUCT REMARK:::
>
TAG IDENFIFICATION:::
FIELD NOTE:::
RXSOL-20-3113-025 is a specially formulated, silica-based product for reducing corrosion normally associated with marine and offshore potable/fresh water storage systems. Use this product into the storage tank will form a protective barrier-type film on internal metal surfaces. In addition, RXSOL-20-3113-025 will not impart any color, odor or taste to water being treated.
Remarks
Note
Rx Marine International maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Rxsol products in your facilities.
Technical Specifications
Appearance: Clear, viscous liquid
Specific Gravity at 25° C (77° F): 1.4
Flash Point (PMCC): None
Freeze Point: 0° C (32° F)
pH: 11.0
Future & Benefit
|
Features |
Benefits |
|
Odorless/tasteless |
Recommended for potable/fresh water tanks |
|
Concentrated liquid |
Cost effective and Easy to apply |
|
Forms protective silicate film |
Protects potable and fresh water tanks against corrosion.Prevents red water conditions |
|
Drinking Water Additives |
Safe to use |
Application
It is use for protect the corrosion in Potable Water Tank, Pipe and Ballast water tank.
Dose
Application and Use
Potable Water Tanks
Rxsol-20-3113-025 can be slug dosed or fed to the tank with a beta metering system. Dose 0.42 liters of Rxsol-20-3113-025 per 10 tons of water to achieve 42 ppm. This dosage will give approximately 12 ppm of SiO2.
NOTE: Water treated with Rxsol-20-3113-025 should not be used in boiler systems.
Permanent Fresh Water Ballast Tanks
The recommended initial dose is 32 ppm silica. To achieve this, dose 1.1 liters of Rxsol-20-3113-025 per 10 tons of fresh water.
On a tank previously dosed with Rxsol-20-3113-025 , 1 liter Rxsol-32-3113-025 per 20 tons should achieve a level of 32 ppm of silica. To ensure a proper level of Rxsol-20-3113-025 is established, and check the label with Rxsol Silica Test Kit .
Keywords
Corrosion Inhibitor Water filter system manufacturer supplier in Mumbai Kandla Chennai Vizag Kolkata INDIA. Ready stock of Potable water corrosion inhibitor in Dubai Fujairah Sharjah Ajman Ras Al Khaimah UAE Gulf Middle East. Buy Corrosion Inhibitor for water filter system now in Muscat Barka Salalah Ruwi OMAN, Yemen, Kenya Africa and Canada
